Avery paint mask.....?

[skullsmasher]

Does this have an adhesive side that is revealed after removing a wax protective part of the sheet?

I am trying to get the right stuff for the gx24 but I dont think actual vinyl is optimal for what I need. Avery paint mask is different or what?

I basically want to be able to cut out my design, and apply it directly to a surface without having to remove each piece and put it together on the surface, see what Im sayin?

thanks you guys/girls.

[Edkrup]

You have to cover your cut vinyl with transfer tape, than remove the backing from the vinyl. Position over your panel. Squegee it down, than remove the transfer tape.

Your ready to remove any section and paint away.

[mike01]

avery spray mask is what u want

[skullsmasher]

How do you apply your tranfer tape ? Seems liek ti could be dificult trying to do it without some sort of apllicator or something.

[Kustomodz]

Skull,
Once you have the paint mask cut , then go to yoru transfer paper , cut the size you need off the roll , then lay it on the paint mask .
here is the way you lay it down ,
Lay the paint mask down on a table , cut side up facing you ,
take the transfer paper and place it on the cut side of the mask sticky side on cut side .
lay it down softly , then with a squeegie or a bondo applacator smooth out the transfer paper on the mask , try not to get bubbles . once that is done.
cut the extra off and peel the backing paper off the paint mask .
Now just lay your cut mask on what your painting and lay it down softly making sure to line it up. then as you did with the squeegie , just smooth it out.
Then carefully peel off the transfer paper and volia there is you paint mask ready for you to weed out what you dont want or how every you wish to use it .

Liam

[skullsmasher]

Cool, cool. I gotcha, I thought so but wasnt sure. they should make all that in one roll....

[tsquirter]

hi
iuse thavery a lot and it works good ...............i also use sign strip abrushable sprayable latex that is killer for masking......its real fast and it leaves the surface clean..........T

[shane]

avery and gap are the only ones ill use any more